impulse input
英 [ˈɪmpʌls ˈɪnpʊt]
美 [ˈɪmpʌls ˈɪnpʊt]
网络 脉冲法
双语例句
- Total propeller-disk area steering wheel impulse input test
螺旋桨旋转盘总面积转向盘转角脉冲试验 - It will introduce the responses of the step, ramp and impulse input for mechanical and circuit systems by using Laplace transform.
本课程将介绍机械与电路等系统的模式，利用拉氏转换决定步阶，斜坡及脉冲等输入的响应。 - The nonlinear gain and the impulse response functions of linear subsystem be obtained by using the step-changeds and cyclic impulse with different amplitudes as input signals.
该方法利用阶跃输入信号获取非线性增益的强一致性估计；利用不同幅值的周期脉冲输入信号获取线性子系统脉冲响应函数的强一致性估计。 - Steering wheel impulse input test
转向盘转角脉冲试验 - Steering wheel impulse input test rotary wash-boring equipment
转向盘转角脉冲试验旋转式水冲钻孔设备 - In the dynamic analysis and parameter identification for a linear structural system, one of the most important steps is to extract the accurate Impulse Response Functions ( IRF) or Frequency Response Functions ( FRF) from the input and the output data of the system.
对于一个线性结构系统，从输入输出数据中提取精确的脉冲响应函数和频响函数是对系统进行动力学建模和参数识别的关键步骤。 - It is shown that such model is optimal for matched outputs in the sense of integral-square-error criterion subject to an Impulse input and also without steady-state output error for polynomial inputs.
这类简化模型在脉冲输入时，其输出同原系统输出之间的误差按平方加权积分意义达到最小值，并且在幂函数和多项式输入时，其输出同原系统输出之间无稳态误差。 - For the measurement of impulse voltages it is valuable to reconstruct the input voltage wave on the high voltage side using the measured output voltage wave and the step response of the measuring system.
在冲击电压测量中，利用测到的输出电压波形和测量系统的方波响应来重建高压侧的输入电压波形是有价值的。 - The compensation filter has an infinite impulse response property and is designed by system identification approach from the known input output pairs of the measuring system.
补偿滤波器选用无限冲激响应（IR）结构形式。根据已知的测量系统输入－输出数据，采用系统辨识的方法估计滤波器参数。 - On the basis of impulse response of the integrating processes, a predictive functional control algorithm was proposed, and a load rejection controller was designed by optimal control theory so that the desinged control system can track setpoint without steady state error in the presence of input disturbance.
基于过程脉冲响应设计预测函数控制器，针对积分过程输入端受到干扰后难以跟踪设定值的缺点，运用最优控制思想设计抗干扰控制器，所设计系统具有双自由度的控制结构。 - By this algorithm, the impulse response of an adaptive filter from. an auto-correlation function and cross-correlation function of reference input and primary input is first estimated, and then using singular value decomposition of matrix, the coefficients of the filter is obtained.
该算法先由参考输入的自相关函数及参考输入与主输入之间的互相关函数，估计出自适应滤波器的脉冲响应，然后由矩阵的奇异值分解定理计算滤波器的系数。 - Testing dynamic systems for impulse response with input signals of different types will produce results different in accuracy.
测试动态系统脉冲反应时，选择不同类型的输入信号会产生不同的测试精度。 - In this paper, a novel adaptive filter based on support vector regression is proposed, which can effectively be used to suppress impulse noise in images. The main idea of our filter is to use SVR impulse detector to judge whether an input pixel is noised.
提出了一种用SVR回归器识别脉冲噪声的思想，并将其应用于图像滤波和恢复，形成了用于对脉冲噪声进行滤波的SVR自适应滤波器。 - The identification of this signal is converted to solving the reconstructed optimization problem. In the optimization problem the impulse model of the input are fully considered and a new mathematic tool is introduced to solve the optimization problem.
将这类信号识别问题转化为一个优化问题求解，在所构造的优化问题中，充分考虑输入模式的脉冲形式，并引入最近发展的数学工具来求解。 - The two digital filters are infinite impulse response ( IIR, Infinite Impulse Response) filter and finite impulse response ( FIR, Finite Impulse Response) filter, and the input and output signal are digital signals.
这两种数字滤波器指无限脉冲响应（IIR，infiniteimpulseresponse）滤波器和有限脉冲响应（FIR，finiteimpulseresponse）滤波器，输入和输出信号皆为数字信号。 - The results of analysis expressed the input shapers can effectively suppress the residual vibration of the manipulator, and the negative impulse input shapers can decrease the delay-time of the system response.
分析结果表明输入整形法能有效抑制机器人的残余振动，负脉冲输入整形器能减少系统响应的时间延迟，多模态输入整形器能有效抑制机器人多个模态的振动。 - And impulse function was introduced into the input part of the state equation, to simulate the step change of boundary potential when a polarity reversal occurred. The strength of the impulse presents the variation of the step change.
同时为了模拟极性反转时边界电位发生的阶跃变化，在状态方程的输入项中引入冲激函数，冲击函数的强度代表了边界电位发生阶跃变化时的变化量。